Konica Minolta BIZHUB 223 - Manual (Page 55)

bizhub 423/363/283/223 4-19
4.11 Proof Copy 4
Using a preview image to check the copy result (Advanced Preview)
Check the finishing image of a copy in the Touch Panel before printing. This prevents copy errors from oc-
curring.
Reference
- This function is available only when a Hard Disk is installed.
0 When you scan the original using the [Program Jobs] function, scan all originals, press [Finish], and then
check the [Advanced Preview].
0 When you attempt to scan the original with an [Insert Image] specified, the machine scans the original
first, and then the insert original. When this process is complete, you can check the [Advanced Pre-
view].
0 To use the [Book Copy] or [Booklet] function, no preview is available. Check the finishing state after
printing.
0 If [Copy Guard] is detected, you cannot check finishing.
1
Load the original.
2
Select the desired copy settings.
3
Press the Proof Copy key.
4
Press [Preview on Screen] for the proof copy method and then select the original direction.
5
Press the Start key.
The Preview (View Status) screen appears.
6
Check the preview image.
% To change the settings, press [View Pages]. Go to Step 7.
% To start printing, press the Start key.
% To scan another original, press [Finish], load the original, and then press the Start key.
7
Change the settings, and then press [View Status].
Settings
[ Prev. Page]/
[Next Page ]
Switch from the current screen to either the previous or the next screen.
[Zoom] Enlarge the preview image and check the details. Press [+] and [-] to
change the zoom ratio from full size to 2, 4 or 8 times the normal size. To
select a different area to be enlarged, touch the scroll bar arrows on the
right and at the bottom side of the image.
The finishing state cannot be displayed if you change the display size.