Konica Minolta BIZHUB 223 - Manual (Page 67)

bizhub 423/363/283/223 5-11
5.1 [Basic] 5
5.1.5 [Finishing]
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
The number of punched holes varies depending on the country you are in.
0 The staple function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.
0 The Punch settings are available only if the Punch Kit PK-517 is installed on the optional Finisher FS-
527.
0 [Fold/Bind] is available only if the Saddle Stitcher SD-509 is installed on the optional Finisher FS-527.
0 [Staple] cannot be used together with [Offset].
0 [Half-Fold] and [Center Staple & Fold] cannot be used together with any of [Offset], [Staple], or [Punch].
%
Press [Basic] ö [Finishing].
Settings
[Sort] When multi-page originals are copied for multiple sets, copies can be fed out
sorted by set of copies.
[Group] When multi-page originals are copied for multiple sets, copies can be fed out
sorted by pages.
1
1
1
4
3
2
1
4
3
2
1
1
1
1