Konica Minolta BIZHUB 223 - Manual (Page 71)

bizhub 423/363/283/223 5-15
5.2 [Original Setting] 5
5.2 [Original Setting]
Configure the original status or original direction for outputting desired copies.
%
Press [Original Setting].
Settings
[Mixed Original] Loads originals of different sizes into the ADF and scan them at a time.
[Z-Folded Original] Correctly detects the original size when folded originals are loaded into the
ADF and copied.
[Original Size] Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
[Custom Size] Enter the original size.
[Photo Size] Select the photo size.
[Binding Position] Specify the original binding position (page margin) to prevent the copy
from being printed upside-down when scanning a 2-sided original.
[Auto] Automatically configures the binding position of
the original.
•
A page margin position along the long side of
the paper is selected if the original length is
11-11/16 inches (297 mm) or less.
• A page margin along the short side of the pa-
per is selected if the original length exceeds
11-11/16 inches (297 mm).
[Original Direction] When copying double-sided originals or making double-sided or com-
bined copies, press this button to specify the direction in which the original
is loaded into the ADF or placed on the Original Glass.
[Despeckle] Reduces the influence of a dirt of the Slit Scan Glass upon a copy output
when loading an original in the ADF.