Konica Minolta Bizhub 215 - Manual (Page 103)

bizhub 215 6-16
6.6 Administrator Settings 6
6.6.1 Selecting the administrator setting
1
Press the Utility key.
The Utility screen appears.
2
Use +, to select [ADMIN. MANAGEMENT], then press OK.
3
Enter the administrator number using the Keypad, then press OK.
% The factory default is [000000].
% To correct a value, press Clear/Stop.
The Administrator Settings screen appears.
6.6.2 Changing the administrator number
1
Select [ADMIN. MANAGEMENT].
% For details on selecting [ADMIN. MANAGEMENT], refer to page 6-16.
2
Use +, to select [ADMINISTRATOR NO.], then press OK.
3
Enter the current administrator number using the Keypad, then press OK.
% To correct a value, press Clear/Stop.
4
Enter a new administrator number using the Keypad, then press OK.
5
For confirmation, enter the new administrator number, then press OK.
This returns to the Administrator Settings screen.
6.6.3 Configuring setting so that sleep mode is not used
1
Select [ADMIN. MANAGEMENT].
% For details on selecting [ADMIN. MANAGEMENT], refer to page 6-16.
2
Use +, to select [SLEEP SHIFT], then press OK.
3
Use +, to select [DISABLE], then press OK.
This returns to the Administrator Settings screen.