Konica Minolta Bizhub 215 - Manual (Page 39)

bizhub 215 3-11
3.6 Loading the original 3
3.6 Loading the original
The original loading methods are classified into two types: loading the original into the ADF and setting the
original on the Original Glass. Load the original using the method appropriate for the type of original being
used.
3.6.1 Loading the original into the ADF
1
Open Lateral Guide.
2
Load the original with the side you want to copy facing up.
% Do not load more than 70 sheets into the ADF at a time,
and do not load the sheets up to the point where the
top of the stack is higher than the , mark. Doing so will
likely cause jamming or spoiling of the original, or ma-
chine failure.
3
Adjust the Lateral Guide to the original size.
% If the original is not loaded correctly, it may not be fed
in straight.
Tips
- If you load the original with two sides into the ADF, the front and back side of the original are inversely
scanned automatically. For details on how to copy a 2-sided original, refer to page 5-5.