Konica Minolta Bizhub 215 - Manual (Page 12)

bizhub 215 2-3
2.1 Part names and their functions 2
* Indicates a built-in option that is not shown in the figure above.
7 Desk DK-706 This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
One tray can be added on this desk.
This desk is hereinafter referred to as the Desk through this
manual.
8 Desk DK-707 This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to three trays can be added on this desk.
This desk is hereinafter referred to as the Desk through this
manual.
9 Desk DK-708 This machine can be installed on this desk.
By using the desk, you can install this machine on the floor.
Up to four trays can be added on this desk.
This desk is hereinafter referred to as the Desk through this
manual.
10 Extended Operation Panel MK-
733 An address book registration number and address can be
registered or recalled while using fax and scanning functions.
11 Image Controller IC-209
*
This is a built-in printer controller that enables you to;
•
Use this machine as PC printer (PCL).
• Scan an original to send its data to a computer or attach
it to an E-mail.
For details, refer to [User's Guide Print Operations].
12 Network Card NC-504
* This is a built-in network card that enables you to;
•
Scan an original to send its data to a computer or attach
it to an E-mail.
For details, refer to the [User's Guide Network Administrator].
13 FAX Kit FK-510
* Allows this machine to function as a fax machine. Alternative-
ly, it allows more telephone lines to be connected.
14 Mechanical Counter MC-504
*
Displays the total number of copied/printed sheets.
No. Name Description