Konica Minolta Bizhub 215 - Manual (Page 52)

bizhub 215 4-9
4.4 Manually making copies 4
4.4 Manually making copies
When making copies on paper of a size not loaded in the tray or making copies on special paper such as
OHP transparencies, envelopes, and thick paper, use the Bypass Tray.
The bypass tray can be used to make a copy only when the optional Multi Bypass Tray MB-505 is installed.
4.4.1 Paper type and number of sheets of paper available for the Bypass Tray
Type:
- Plain paper, recycled paper (thick paper: 17 lb to 23-15/16 lb (64 g/m
2
to 90 g/m
2
)): 100
- Special paper
– Thick paper 1 (Thick paper: 24-3/16 lb to 31-15/16 lb (91 g/m
2
to 120 g/m
2
)): 20 or less
– Thick paper 2 (Thick paper: 32-3/16 lb to 41-3/4 lb (121 g/m 2 to 157 g/m 2 )): 20 or less
– OHP transparency: 10 or less
– Envelope: 10 or less
Size:
- Width: 3-9/16 inches to 11-11/16 inches (90 mm to 297 mm)
- Length: 5-1/2 inches to 17 inches (140 mm to 432 mm)
4.4.2 Adjusting the Bypass Tray
You can adjust the Bypass Tray Extension to fit the paper size as shown below.