Konica Minolta Bizhub 215 - Manual (Page 122)

bizhub 215 7-3
7.1 If this copy is output 7
The edge of the copied image is
dirty Is the Original Pad dirty? Clean the Original Pad using a
soft cloth dampened with a mild
detergent. (p. 8-6)
Was the selected paper size
larger than the original?
(With a Zoom setting of Full
Size) Select a paper size that is the
same size as the original. (p. 4-7)
Otherwise, select Auto Setting for
Zoom to enlarge the copy to the
selected paper size. (p. 4-19)
Is the size or orientation of the
original different from that of the
paper?
(With a Zoom setting of Full
Size) Select a paper size that is the
same size as the original. Other-
wise, select a paper orientation
that is the same as that of the
original.
Was the copy reduced to a size
smaller than the paper?
(With a reduced zoom specified
manually) Select a copy zoom ratio that ad-
justs the original size to the se-
lected paper size. (p. 4-19)
Otherwise, select Auto Setting for
Zoom to reduce the copy to the
selected paper size. (p. 4-19)
The image is copied at an angle. Is the original positioned cor-
rectly? Position the original along the
Original Scale correctly. (p. 3-12)
Load the original into the ADF,
and slide the adjustable Lateral
Guide to fit the size of the origi-
nal. (p. 3-11)
Is the original incorrectly posi-
tioned in the ADF? Open the ADF, and position the
original along the Original Scale
correctly. (p. 3-11)
Are the adjustable Lateral Guide
correctly positioned against the
edges of the paper? Slide the adjustable Lateral Guide
against the edges of the paper.
Was curled paper loaded into
the paper tray? Flatten the paper before loading
it.
Copy status Major cause Correction action