1 frame/center erase type, Frame/center erase type -12 – Konica Minolta Bizhub 215 User Manual
Page 79
bizhub 215
5-12
5.6
Setting book separation copy
5
6
Use +, to select [FRAME], [CENTER], or [CENTER+FRAME], then press OK.
% If you select [FRAME], [CENTER], or [CENTER+FRAME] and press ), you can specify the erase
width. You can set the erase width for CENTER within the range from 2 mm to 30 mm, and the erase
width for FRAME within the range from 4 mm to 20 mm in steps of 1 mm. Press OK.
7
Press Back to return to the basic screen.
is displayed in the basic screen.
8
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
9
Use the Keypad to specify the number of copies, then press Start.
Tips
-
The book separation copy and the auto zoom setting, the auto paper setting, 2side
→ 1side/2side →
2side copy setting, the mixed original setting, ID copy setting, 2 in 1/4 in 1 copy setting cannot be set
at the same time.
5.6.1
Frame/Center erase type
Erase type
Description
Finishing
[FRAME]
Erases the area outside the orig-
inal and copy data.
Original
Copy
[CENTER]
Erases the center area of the
original and copy data.
Original
Copy
[CENTER + FRAME]
Erases the area to the outside
and center of the original and
copy data.
Original
Copy