Konica Minolta Bizhub 215 - Manual (Page 41)

bizhub 215 3-13
3.6 Loading the original 3
3.6.3 Loading the highly translucent or transparent original
When you set the highly translucent or transparent original, such as OHP transparencies, tracing paper, and
diazo photosensitive paper, follow the below procedure.
1
Open the ADF.
2
Set the original with the side you want to copy facing down.
% Set the original along the Original Scale on the left and at the top of the Original Glass.
3
Place a blank sheet of paper that is the same size as
the original over the original.
4
Gently close the ADF.
3.6.4 Setting the book original
When setting the bound two-page spread original, follow the below procedure.
For details on the book separation copy, refer to page 5-11.
NOTICE
Do not place an original weighing more than 4-7/16 lb (2 kg) on the Original Glass. Furthermore, do not exert
strong pressure to press down on a book or any other form of original that has to be spread out on the original
glass. Otherwise, the machine may be damaged or a failure may occur.
1
Open the ADF.
2
Set the book original onto the Original Glass.
% For the original spread over two facing pages, align it
with the (arrow) mark on the back-left corner of the
Original Scale.