Konica Minolta Bizhub 215 - Manual (Page 50)

bizhub 215 4-7
4.3 Selecting the tray 4
4.3 Selecting the tray
1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Select Paper.
3
Use +, to select [AUTO] or one of the trays, then press OK.
The screen returns to the basic screen.
% By selecting [TRAY1] and pressing ), you can specify the size, unit, and type of paper.
% By selecting one of the trays from [TRAY2] to [TRAY5] and pressing ), you can specify the unit of
the paper size and paper type.
4
Configure other desired settings.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
5
Press the Start key.
Tips
- If [NO SUITABLE PAPER] appears on the Display after you select [AUTO] and press Start, appropriate
paper is not loaded in the tray. Load paper of the appropriate size or select one of the trays, then press
Start again.
- The auto zoom setting and the auto paper setting, the manual zoom setting, the book separation copy
setting, or the ID copy setting cannot be selected at the same time.