Konica Minolta Bizhub 215 - Manual (Page 35)

bizhub 215 3-7
3.4 Loading paper 3
3.4 Loading paper
This section describes how to load paper into each paper tray.
For the types of paper to be used, refer to page 8-2.
3.4.1 Loading paper into Tray1
1
Pull out Tray1.
1. Paper take-up roller
NOTICE
Be careful not to touch the surface of the paper take-up
roller with your hand.
2
Press down the lifter plate until it "clicks" into position.
2. Lifter plate
3
Load paper.
% Be sure to load the paper below the tab, so that the
stack height does not exceed the , mark.
4
Adjust the lateral guide to the size of the paper.
% Push the lateral guide firmly up against the edges of the
paper.
5
Reset the tray.