Konica Minolta Bizhub 215 - Manual (Page 89)

bizhub 215 6-2
6.1 Utility 6
6 Utility and Copy Settings
6.1 Utility
The Utility screen provides 13 setting items.
Tips
- Some items cannot be configured depending on which optional device is installed in this machine. If an
unavailable item is selected, an error message appears.
No. Name Description Page
1 [MACHINE SETTING] Configure the settings for the operating environment
of this machine. p. 6-4
2 [PAPER SOURCE SET-
UP] Specify the size and type of the paper loaded in Tray 1.
You can also specify the unit of paper size and paper
type loaded in Tray2-Tray5. p. 6-9
3 [CUSTOM SIZE MEMO-
RY] Register up to two custom sizes. p. 6-12
4 [DRUM DEHUMIDIFY] Perform maintenance operations to prevent a function
reduction. p. 6-14
5 [ADMIN. MANAGE-
MENT] Configure the remote monitor settings or settings for
the administrator to manage each account. p. 6-16
6 [COPY SETTING 1] Configure the default settings for each copy function. p. 6-21
7 [COPY SETTING 2] p. 6-28
8 [DIAL REGISTRATION] This item is available if the optional Fax Kit FK-510,
Image Controller IC-209, or Network Card NC-504
is installed. For details, refer to [User's Guide Fax Op-
erations] [User's Guide Network Scan Operations]. -
9 [FAX REGISTRATION] This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations]. -
10 [FAX TX OPERATION] This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations]. -
11 [FAX RX OPERATION] This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations]. -
12 [REPORTING] This item is available if the optional Fax Kit FK-510 is
installed. For details, refer to [User's Guide Fax Oper-
ations]. -
13 [SCAN SETTING] This item is available if an optional Image Controller
IC-209 or Network Card NC-504 is installed in this
machine. For details, refer to [User's Guide Network
Scan Operations]. -