Konica Minolta Bizhub 215 - Manual (Page 105)

bizhub 215 6-18
6.6 Administrator Settings 6
6.6.6 Changing or deleting the ID (account)
1
Select [ADMIN. MANAGEMENT].
% For details on selecting [ADMIN. MANAGEMENT], refer to page 6-16.
2
Use +, to select [ACCOUNT TRACK], then press OK.
3
Use +, to select [ACCOUNT NO. REG.], then press OK.
4
Enter a target number using the Keypad, then press OK.
% Specify the 3-digit ID (account) number.
% To correct the value, press Clear/Stop.
5
Use +, to select [CHECK/EDIT], then press OK.
6
Use +, to select the target number.
% To change the number, press OK, and go to the next step.
% To delete the number, press Clear/Stop, and select [YES].
7
Enter a new number using the Keypad, then press OK.
% If the entered ID (account) number has been already registered, [REGISTERED!] is displayed.
% To continuously change or delete the next number, repeat Steps 6 to 7.
8
When all changing or deleting operations have been completed, press Back.
This returns to the Administrator Settings screen.