7 copy setting 1, Copy setting 1 -20 – Konica Minolta Bizhub 215 User Manual

Page 107

Advertising
background image

bizhub 215

6-20

6.7

COPY SETTING 1

6

6.7

COPY SETTING 1

The mode when you turn on the power or press Reset is called the initial mode. COPY SETTING 1 or COPY
SETTING 2 enables you to change the initial mode settings for each copy function.

Items of COPY SETTING 1

No.

Settings

Description

1

[PAPER PRIORITY]

Select a tray to be given priority when Auto Zoom is selected from
[TRAY1], [TRAY2], [TRAY3], [TRAY4], [TRAY5], and
[MULTI BYPASS].

The factory default is [TRAY1].

2

[QUALITY PRIORITY]

Select the image quality when you turn on the power or reset the set-
tings from [TEXT], [PHOTO], and [TEXT/PHOTO].

The factory default is [TEXT].

3

[DENSITY PRIORITY]

Select the density when you turn on the power or reset the settings
from [AUTO] and [MANUAL].

The factory default is [AUTO].

4

[DENSITY LEVEL] -
[DENSITY LEVEL(A)]

Specify a density level in Auto mode from three levels.

The factory default is

.

5

[DENSITY LEVEL] -
[DENSITY LEVEL(M)]

Specify a density level in Manual mode from nine levels.

The factory default is

.

6

[DUPLEX PRIORITY]

This item is available if the optional Reverse Automatic Document
Feeder DF-625
or Automatic Duplex Unit AD-509 is installed.
Select an original and proof copy mode when you use the automatic
2-sided printing function from [1-SIDE

→ 1-SIDE],

[1-SIDE

→ 2-SIDE], [2-SIDE → 1-SIDE], and [2-SIDE → 2-SIDE].

The factory default is [1-SIDE

→ 1-SIDE].

7

[OUTPUT BIND POS.]

Select the page margin position when you use the automatic 2-sided
printing function from [LEFT], [RIGHT], and [TOP].

The factory default is [LEFT].

8

[ORIG. BINDING POS.]

Select the page margin position of the original when you use the au-
tomatic 2-sided printing function from [LEFT], [RIGHT], and [TOP].

The factory default is [LEFT].

9

[BINDING POSITION]

Specify the left page (Left Bind) or right page (Right Bind) to be
scanned first when a book original is scanned.

The factory default is [LEFT].

10

[MARGIN SETTING]

Specify the page margin width within the range from 0 mm to 20 mm
in steps of 1 mm when giving margin to paper.

The factory default is 10 mm.

11

[ERASE SETTING]

Specify the erase width on the left, upper, and around the paper
when you use the frame/center erase function within the range from
4 mm to 20 mm in steps of 1 mm.

The factory default is [LEFT]. The erase width is 10 mm.

12

[SMALL ORIGINAL]

Specify whether to [DISABLE] or [ENABLE] copying of a small size
original for which the size cannot be automatically detected.

The factory default is [ENABLE].

Advertising