Konica Minolta Bizhub 215 - Manual (Page 123)

bizhub 215 7-4
7.2 Major messages and troubleshooting 7
7.2 Major messages and troubleshooting
Message Cause Correction action
[PAPER JAM Open #th side
cover] A paper jam has occurred in this
machine. "#" indicates a tray. Open the cover at the displayed
position, and remove the
jammed paper. For details, refer
to [Quick Guide
Copy/Print/Fax/Scan Opera-
tions].
Jammed paper is left in this ma-
chine. "#" indicates a tray. Open the cover at the displayed
position, and remove the
jammed paper again. For details,
refer to [Quick Guide
Copy/Print/Fax/Scan Opera-
tions].
[Original doc. jam Open
doc.feed cover] Paper jam inside the ADF.
Jammed paper is left in the ADF. Open the cover at the displayed
position, and remove the
jammed paper. For details, refer
to [Quick Guide
Copy/Print/Fax/Scan Opera-
tions].
[FRONT COVER OPEN
CLOSE FRONT COVER] The Front Cover of this machine
is opened, or not set securely. Securely close the Front Cover
of this machine.
[DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER] An original is loaded into the ADF
while the ADF is opened. Securely close the ADF.
[DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER] The Document Feeder Cover of
the ADF is opened. Securely close the Document
Feeder Cover.
[TONER EMPTY SUPPLY TON-
ER] Toner is depleted.
Cannot copy or print data. Install a new Toner Bottle. For
details, refer to [Quick Guide
Copy/Print/Fax/Scan Opera-
tions].
[PAPER EMPTY LOAD PA-
PER(#XXX)] Paper-out occurs in the selected
tray.
"#" indicates a tray, and "XXX"
indicates the paper size. Load paper of the displayed size
into the displayed tray.
[SET ORIGINAL TO ADF] When the copy function is start-
ed using the ADF (such as mixed
original copy), the original is not
loaded into the ADF. Or the ADF
is opened. Set the original into the ADF.
Securely close the ADF.
[REMOVE ORIGINAL IN ADF] When the copy function is start-
ed using the Original Glass
(such as ID COPY), the original is
left in the ADF. Remove the original from the
ADF.
[Paper Empty] (Copy settings being configured)
The selected tray has run out of
paper. Load paper of the displayed size
into the displayed tray or press
Paper to select another paper
size.
[NO SUITABLE PAPER LOAD
PAPER(#XXX)] • The paper size of the select-
ed tray was changed when
copying operations were be-
ing carried out.
• There is no suitable-size pa-
per when mixed originals are
copied in the Auto Paper Se-
lect mode. "#" indicates a
tray, and "XXX" indicates the
paper size.
Load paper of the displayed size
or press Paper to select another
paper size.
[APS SIZE ERROR(XXX)] There is no suitable-size paper
when the original is copied in the
auto paper select mode. "XXX"
indicates the paper size. Load paper of the suitable-size
paper or press Paper to select
another paper size.