2 extended operation panel mk-733 (option), Extended operation panel mk-733 (option) -11 – Konica Minolta Bizhub 215 User Manual

Page 20

Advertising
background image

bizhub 215

2-11

2.3

Control Panel

2

2.3.2

Extended Operation Panel MK-733 (Option)

For details on using Extended Operation Panel MK-733, refer to [User's Guide Fax Operations] or [User's
Guide Network Scan Operations].

No.

Name

Functions

Page

1

Fax

Press this key to switch to the fax mode.
The lamp lights up green when the machine is in the
fax mode.

2

Scan

Press this key to switch to the scan mode.
The lamp lights up green when the machine is in the
scan mode. (This function is only available when Net-
work Card NC-504
or Image Controller IC-209 is
installed.)

3

Copy

Press this key to switch to copy mode. The lamp
lights up green when the machine is in copy mode.

4

Auto RX Indicator

Lights up green when the machine is set in Auto RX
mode.

5

Memory TX

Press this key to configure a memory transmission.
This lamp lights up green when the Memory TX mode
is set to ON.

6

On Hook

Press this key to set the machine in the state where
the phone is taken off the hook. Repressing this key
returns to the state to hang up.

7

Redial/Pause

Press this key to redial the last recipient you
called.

This function is available during the wait time to
make a call from an extension line to an external
line, or to receive information from an information
service.

8

Speed Dial

Press this key to dial a fax number that has been pre-
registered in the speed dial.

9

AddressBook

Press this key to display the information registered in
the one-touch dial, group dial, and speed dial.

10

Switching Plate

Use this plate to switch One-Touch Dial Key num-
bers. When the Switching Plate is closed down-
ward, one-touch dial keys 01 to 16 are available.
When it is opened upward, one-touch dial keys 17 to
32 are available.

11

One-Touch Dial Key

Press this key to dial a pre-registered destination.

Use keys 01 to 32 to configure one-touch dial
key
and group dial settings.

Use keys 29 to 32 to configure program dial set-
tings.

Advertising