Konica Minolta Bizhub 215 - Manual (Page 26)

bizhub 215 2-17
2.4 Power 2
2.4 Power
2.4.1 Turning on the power
Tips
- The warm up time is 15 seconds at room temperature of 23°C.
- You can program the next copy job even during warm up. For details, refer to page 2-18.
Press the | side of Main Power Switch.
The indicator on Start lights up in orange and [PLEASE WAIT!] is displayed on the Display.
After that, the indicator on Start lights up in blue and [Warming Up] is displayed on the Display.
2.4.2 Turning off the power
1
Confirm that all jobs have finished.
2
Press the o side of Main Power Switch.
2.4.3 Initial mode
The setting when this machine is turned on or reset is referred to as "initial mode". The initial mode is used
as a basic mode to perform all operations.
Copy mode
- Number of copies: 1
- Copy density: Auto
- Zoom ratio: Full size (100%)
- Paper: Auto Paper
- Finishing: Non-sort
d
Reference
The initial mode can be changed in the Utility screen. For details, refer to page 6-2.
2.4.4 Auto Panel Reset
This function returns you to the initial mode when the specified time has elapsed after copying is finished or
the user paused operations of this machine. (The factory default is [1min].)
d
Reference
The time period until the auto panel reset function is enabled can be set to 30 seconds or between one and
five minutes. The auto panel reset function can be disabled. For details, refer to page 6-4.