2 loading paper to tray2/tray3/tray4/tray5, Loading paper to tray2/tray3/tray4/tray5 -8 – Konica Minolta Bizhub 215 User Manual
Page 36
Advertising
bizhub 215
3-8
3.4
Loading paper
3
3.4.2
Loading paper to Tray2/Tray3/Tray4/Tray5
1
Pull out the tray.
2
Press down the lifter plate until it "clicks" into position.
1. Lifter plate
3
Load paper.
% Be sure to load the paper below the tab, so that the
stack height does not exceed the , mark.
4
Adjust the lateral guide to the size of the paper.
% Push the lateral guide firmly up against the edges of the
paper.
5
Reset the tray.
Advertising