Konica Minolta Bizhub 215 - Manual (Page 49)

bizhub 215 4-6
4.2 Stopping, restarting, or erasing the copy job 4
4.2 Stopping, restarting, or erasing the copy job
To interrupt the copy operation being performed, follow the below procedure.
1
Configure the copy settings and press Start.
Copying begins.
2
Press Clear/Stop when copying operations were being carried out.
The [Please wait] message appears and the job stops.
% To restart the stopped job, select [NO], then press OK.
% To erase the stopped job, select [YES], then press OK.