Konica Minolta Bizhub 215 - Manual (Page 86)

bizhub 215 5-19
5.11 Registering or recalling the copy settings 5
5.11 Registering or recalling the copy settings
By registering the frequently used copy mode, you can recall it as required. You can register up to two copy
settings.
The available setting items are as follows.
- Number of Copies
- Tray Select (Including [AUTO])
- Image quality
- Density (Including [AUTO])
- Each item of the function (Frame Erase, Page Margin, X/Y Variable Zoom Ratio, Neg./Pos. Reverse,
Book Separation)
- Mixed Original
- Combine Originals
- Zoom
- Finishing
- ID Copy
- Stamp
If the paper loaded in the tray is in custom size, it is not registered. For details on registering the custom size,
refer to page 6-12.
5.11.1 Registering the copy setting
Tips
- You cannot register setting while this machine is warming up.
1
Set various items you want to register.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
2
Press Mode Memory.
The program screen appears.
3
Use +, to select [REGISTER], then press OK.
4
Use +, to select the program number to be registered, then press OK.
The current copy setting is registered.
% If you register a new copy setting to a program number for which a program has been already reg-
istered, the previous copy setting is erased.