AEG BE2003021W - Manual (Page 10)

Buttons
Button Function Description
CLOCK To set the clock function.
, MINUS, PLUS To set a value for temperature or time
MINUTE MINDER To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
TEMPERATURE To check temperature inside the oven cavity.
To check the Food Sensor temperature, when
is connected (if applicable). Use only when the
oven function is set.
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease
CLOCK FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
MINUTE MINDER Use to set a countdown time. This function has no effect on
the operation of the oven.
TIME OF DAY To set, change or control the time of day. Refer to 'Setting the
time of day'.
DURATION Use only when the oven function is set to set how long the
oven operates.
END Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
matically later.
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use or wait 5 seconds for an automatic
confirmation.
Setting the DURATION or END
1. Press again and again until the display shows or .
or flashes in the display.
2. Press or to set minutes.
3. Press to confirm.
4. Press or to set the necessary hour.
5. Press to confirm.
10 Clock Functions