AEG BE2003021W - Manual (Page 13)

Every time you put the core temperature sensor in the socket, you need to set the duration
and end time again.
When you put the core temperature sensor plug in the socket, the display shows current
core temperature. Touch to set the temperature that the Temperature/Time display
shows during cooking with the core temperature sensor:
• first touch of - the display shows set core temperature which changes after every
10 seconds to current core temperature;
• second touch of - the display shows oven set temperature;
• third touch of - the display shows current oven temperature which changes after
every 10 seconds to set oven temperature;
Installing the Oven Accessories
Put in the slide-in accessories so that the double side edges are at the back of the oven and
point down to the bottom. Push the slide-in accessories between the guide-bars of one of
the oven levels.
The (deep) roasting pan and the oven shelf have
double side edges. These edges and the shape of
the guide-bars causes the anti-tilt safety for the
oven accessories.
Installing the oven shelf and (deep) roasting
pan together
Put the oven shelf on the (deep) roasting pan.
Push the (deep) roasting pan between the guide-
bars of one of the oven levels.
Combi Tray
The combi tray includes the inlay grid and the roasting pan. You can use the inlay grid on
the two sides.
WARNING!
Risk of burns when removing the accessories from a hot oven.
Using the Accessories 13