AEG BE2003021W - Manual (Page 27)

Replacing the oven lamp:
1. You can find the lamp glass cover at the left side of the cavity.
Remove the left shelf rail.
2. Use a narrow, blunt object (for example
a teaspoon) to remove the glass cover.
Clean the glass cover.
3. If necessary, replace the oven lamp with
applicable 300°C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf rail.
Oven door and glass panels
To clean the oven door, remove it.
CAUTION!
Be careful when you remove the door from the appliance. The door is heavy!
Removing the oven door
1. Open the oven door as far as it goes.
2. Fully press clamping levers (A) on the two
door hinges.
3. Close the oven door until the first position
(angle approximately 70°).
4. Hold of the oven door with one hand on
each side and pull it away from the oven
at an up angle.
To install the door follow the procedure in re-
verse.
The number of glass panels if different for the different models.
CAUTION!
Put the oven door with the outer side down on a soft and level surface to prevent scratches.
Removing and cleaning the door glass panels
1. Remove the oven door.
A
A
Care and cleaning 27