AEG BE2003021W - Manual (Page 8)

Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.
Setting the time of day
After the software version goes off, the display shows and " 12:00 ". " 12 " flashes.
1. Press or to set current hour.
2. Press to confirm (necessary only for first the setting, later new time will be saved
automatically after 5 seconds).
The display shows
and set hour. " 00 " flashes.
3. Press or to set current minutes.
4. Press to confirm (necessary only for first the setting, later new time will be saved
automatically after 5 seconds) .
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the oven is off.
Press . The set time and symbol flash in the display. To set new time use the procedure
"Setting the time of day".
DAILY USE
WARNING!
Refer to "Safety information" chapter.
To use the appliance, press the control knob. The control knob comes out.
Activating and deactivating the appliance
1. Turn the oven functions control knob to select an oven function.
2. Turn the temperature control knob / to set a temperature.
3. To deactivate the appliance turn the oven functions control knob to off position
("0") .
Oven Functions
Oven function Application
Rapid Heat-up To decreases the heat-up time.
8 Daily use