AEG BE2003021W - Manual (Page 26)

Shelf rails
You can remove the shelf rails to clean the side walls.
Removing the shelf rail
1. Pull the front of the shelf rail away from
the side wall.
2. Pull the shelf rail from the back of the side
wall to remove it.
To install the shelf rail follow the procedure in
reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf run-
ners must point to the front!
Oven lamp
WARNING!
There is a risk of electrical shock.
Oven lamp and the lamp glass cover can be hot.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp
glass cover and the cavity.
Replacing the oven lamp:
1. You can find the lamp glass cover at the cavity ceiling.
Turn the lamp glass cover counterclockwise to remove it.
2. Clean the glass cover.
3. If necessary, replace the oven lamp with applicable 300°C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
1
2
26 Care and cleaning