Other included accessories – Brother PC 8500 User Manual
Page 10
1 Bobbin (3) 136492-101
2 Seam ripper X54243-001
3 Screw XA5904-051
4 Scissors 184783-001
5 Chalk pen 184944-001
6 Cleaning brush XA4527-001
7 Eyelet punch 135793-001
8 Screwdriver (Large) X55467-051
9 Screwdriver (Small) X55468-051
10 Spool cap (Small) 130013-003
11 Spool cap (Large) 130012-003
12 Extra spool pin* XA3336-051
13 Spool felt X57045-001
14 Disc-shaped screwdriver XA2005-051
15 Walking foot* X81064-001
16 Side cutter X80943-001
17 Embroidery set (Regular) SA422 X80903-002
18 Embroidery frame (Regular) XA2171-101
19 Embroidery sheet (Regular) XA2212-001
20 Net* 127610-000
21 Embroidery set (Large) SA423 X80902-002
22 Embroidery frame (Large)
XA2168-201
23 Embroidery sheet (Large) XA2209-001
24 Embroidery set (Small) SA421 X80904-102
25 Embroidery frame (Small) XA2174-101
26 Embroidery sheet (Small) XA2215-101
27 Screw* XA4813-051
28 Foot contro
lle
r 234522-001
29 Pattern Sheet XA4595-001
30 Hard case XA1821-
106
31 Knee Lifter XA6941-001
32 Embroidery bobbin thread SA-BTS X81164-001
7
OTHER INCLUDED ACCESSORIES
1
2
3
4
5
6
7
8
9
10 11 12
13 14 15
16 18
17
19
20 22 23
25 26 27
28 29
31 32
30
21
24
No. Part Name
Part Code
U.S.A. Others
* Use the same screw when installing both the
side cutter and the walking foot.
* If using special threads which wind quickly off
the thread spool, place a net on the spool
before using.
* If using the walking foot,
please refer to the
explanatory sheet which is
inserted in the instruction
book.
* The extra spool pin which is
provided as an accessory
should be attached to the
end of the bobbin winder
shaft during use.
Note (For U.S.A. only)
Foot controller: Model J2
This foot controller can be used for this machine
model PC-8500.
(Programmed