Pintuck – Brother PC 8500 User Manual
Page 76
PINTUCK
1. Mark along the folds on the reverse side of the fabric.
1
Reverse side
2. Turn the fabric and iron the folded parts only.
1
Surface
3. Select the “
” stitch and then touch the “
” key.
*
It will not be necessary to adjust the thread tension if
pintucking is selected by pressing the “
” key.
I
4. Put the right end of presser foot “I” into the holder, and sew
a straight stitch along the fold.
1
Width for pintuck
2
Reverse side
3
Surface
*
When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
Select the “
” stitch and then touch the “
” key.
I
73
(Programmed