Brother PC 8500 - Manual (Page 172)

CAUTION
Disconnect the power cord from the wall socket before cleaning the screen, otherwise injury and
electric shocks may result.
If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents.
Cleaning the screen
CAUTION
Disconnect the power cord from the wall socket before cleaning the machine surface, otherwise
injury and electric shocks may result.
If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly and then
wipe the surface. After cleaning it once in this way, wipe it again with a dry cloth.
Cleaning the machine surface
CAUTION
Disconnect the power cord from the wall socket before cleaning the shuttle, otherwise injury and
electric shocks may result.
Sewing performance will suffer and bobbin thread detection will become unreliable if dust collects in the
shuttle. It should be kept clean at all times.
Cleaning the shuttle
CLEANING
MAINTENANCE
169
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up