Brother PC 8500 - Manual (Page 41)

38
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
AUTOMATIC REINFORCEMENT STITCHING
1. Select the stitch pattern.
2. Touch the automatic reinforcement stitch key.
1 Automatic reinforcement stitch key
1
START
STOP
3. Press the “START/STOP” button.
A reinforcement stitch will be sewn before
sewing starts. A reinforcement stitch will not
be done if there is a pause in sewing. Press
the “START/STOP” button to pause sewing.
An ending reinforcement stitch will not be
sewn. (The fabric may be turned or adjusted
as required.) Press the “START/STOP” button
again to restart sewing.
4. When sewing is completed, press the
“REVERSE STITCH” button to sew a
reinforcement stitch and stop.
1 Automatically stops.
* Fabric should be placed 3 to 4 stitch lengths
behind the presser foot before sewing the
reinforcement stitch.
Touching the automatic reinforcement stitch key
once again, turns off the automatic reinforcement
stitch operation.
This stitch automatically prevents fraying.
1
Cancelling automatic reinforcement stitching