Brother PC 8500 - Manual (Page 125)

122
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
1. Touch the “MULTI COLOR” key to change to the single
color mode. If the “START/STOP” button is pressed, a
single color of the pattern will be embroidered and then the
machine will stop automatically.
2. Trim any excess thread.
* This pattern is the No. 2 FLOWER pattern from the option
card.
Embroidering a single color pattern when “MULTI COLOR” is displayed
The stitch density adjustment is not available for all patterns.
Patterns other than the characters and some frame patterns are
not adjustable.
1. Touch the “TENSION” key.
2 1 3
2. The stitch density will become further apart (coarser) each
time the “ ” key is touched.
The stitch density will become closer together (finer) each
time the “
” key is touched.
1 AUTO
2 Fine (stitches closer together)
3 Coarse (stitches farther apart)
* The normal setting is standard.
Changing the stitch density for characters and some frame patterns