Brother PC 8500 - Manual (Page 48)

45
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
STRAIGHT STITCHES
1 Normal sewing
2 Normal sewing
3 Reinforced sewing
4 Stretch fabric sewing
5
3 1. Baste the fabric or set a pin, sew a reverse stitch at the
start, then start sewing.
1 Reverse stitch at start
* Place the fabric under presser foot while keeping space
from the top edge of the fabric for reverse sewing.
5
3
2. Sew at slow speed near the end and then press the
“REVERSE STITCH” button to sew a reinforcement stitch
and stop.
3. Cut the thread by pressing the “THREAD CUTTER” button.
* When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
2. UTILITY STITCHES
J
1 2 3 4