Scallop stitch – Brother PC 8500 User Manual
Page 82
Advertising
SCALLOP STITCH
N
Stitch for decorating collars of blouses, edges of table cloths, etc.
5
1. Attach presser foot “N”. Sew the remaining edge of the
fabric so that the stitch doesn’t go right to the edge of the
fabric.
1
Surface
*
When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
2. Trim along the stitches carefully so as not to cut the stitches.
*
There are products in the marketplace that will “seal” the
trimmed areas. This will give a more finished appearance.
79
(Programmed
Advertising