Blind hem stitches – Brother PC 8500 User Manual
Page 55
52
(Programmed
BLIND HEM STITCHES
1
Other fabric
2
Stretch fabric
R
1
2
1
3
5
1. Fold the fabric and baste it as illustrated.
1
0.5 cm (3/16”)
2
Surface
3
0.5 cm (3/16”)
4
Reverse side
5
Basting stitch
1
2. Attach presser foot “R”. Lower the presser
foot so that its guide meets the edge of the
folded hem.
1
Guide
2
Folded hem
R
3. Adjust the needle position using the stitch
width setting keys so that needle slightly
catches the fold of the hem, and then sew the
fabric.
1
Needle drop position
*
When the automatic thread cutting and
automatic reinforcement stitch are preset, a
reinforcement stitch will be sewn automatically
at the start of sewing. Press the “REVERSE
STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish
of sewing.
4. Turn over the fabric and remove the basting
stitch.
1
Reverse side
2
Surface