Philips 4 HD S VHS HIFI VCR - Manual (Page 13)

Automatic Channel Setup 13
5 Wait for the VCR to set up
channels.
2-4
1
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets you
set up channels again. Make each entry within one minute of the
previous entry.
5
Wait for a few minutes while the VCR sets up channels.
When programming is complete, AUTO CH. SET COMPLETED will
appear on the screen. Then, the programming of the lowest channel
number placed in the VCR’s memory will appear on the screen.
Now when you press the CH(annel) 8/9 button, you will scan only
through channels you receive.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select TUNER
SET UP, then press the FF :/OK button.
3
Press the FF :/OK button repeatedly so that ANT (if you
have an antenna) or CABLE (if you have a cable
connection) appears beside CABLE/ANTENNA.
4
Press the STOP 9 button to select AUTO CH.
PROGRAMMING, then press the FF :/OK button. AUTO
CH. SET PROCEEDING PLEASE WAIT and a scale that shows the
progress of channel setup will appear on the screen. The VCR will
memorize all the channels you receive.
• The two Line Input modes will always
be stored in the VCR’s memory at
channel 00. To select A/V IN FRONT
or A/V IN REAR, press 0, then press
the CH(annel) 8/9 button so that L-
F appears on the display panel (for
A/V IN FRONT) or
L-I appears on the display panel (for
A/V IN REAR). To exit Line Input
mode, use the CH(annel) 8/9 button
to select a channel other than 0.
Helpful Hints
SELECT , 9 CHOOSE :/OK
A CABLE/ANTENNA CABLE
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
SELECT , 9 CHOOSE :/OK
A CABLE/ANTENNA ANT
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT , 9 CHOOSE :/OK
CABLE/ANTENNA ANT
A AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
AUTO CH. SET PROCEEDING
PLEASE WAIT
START FINISH
L L L L L L L L L L L L • • • • • • • • •
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
REV
/OTR REC REC
FWD
-
+
-
+
SPEED 0 CLEAR