Philips 4 HD S VHS HIFI VCR - Manual (Page 20)

20 Daylight-Savings Time
6
Press the EXIT/STATUS button.
Follow the steps below to program the VCR so its clock will
automatically move forward one hour in April and turn back one
hour in October.
3
Press the PLAY 8 or STOP 9 button to select CLOCK,
then press the FF :/OK button. CABLE BOX USERS SET
CLOCK MANUALLY will appear briefly. (If AUTO CLOCK is set to
OFF, PBS CH. and TIME ZONE will not appear in the menu.)
5
Press the PLAY 8 or STOP 9 button so that ON, OFF, or
AUTO appears beside D.S.T.
Select ON to make the clock adjust itself according to the VCR’s
calendar. Select OFF to turn off the feature. Select AUTO to make
the clock adjust itself according to the signal it receives from the PBS
channel. If AUTO CLOCK is set to OFF, you may only set D.S.T. to
ON or OFF.
4
Press the FF :/OK button repeatedly to select D.S.T.
SELECT , 9 CHOOSE :/OK
A CLOCK
LANGUAGE ENGLISH
VCR PLUS+ CH.
CABLE BOX
DBS RECEIVER
TO END PUSH EXIT
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
TIME 10:45AM
DATE 01/01/99
FRIDAY
AUTO CLOCK ON
PBS CH. AUTO
D.S.T. AUTO
TIME ZONE AUTO
TO SET PUSH ,9 THEN :/OK
TO END PUSH EXIT
7
If you set the “AUTO CLOCK” to “ON”, an on-screen
message may ask you to turn off the VCR. Press the
POWER button to turn off the VCR. Auto will flash in the
display panel until the clock is set. Leave the VCR power off until
the clock is set. If – – : – – appears on the display panel after you
turn off the VCR for several minutes, the VCR could not find the
time. Use a different method to set the clock.
2-5
6
1
7
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
REV
/OTR REC REC
FWD
-
+
-
+
SPEED 0 CLEAR