Philips 4 HD S VHS HIFI VCR User Manual
Page 37
Setting Up the VCR Plus+ Programming System (cont’d) 37
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that
some stations have VCR Plus+ and Cable/TV channel numbers
that are the same, and other stations have channel numbers that
do not match. You must tell the VCR the VCR Plus+ and
Cable/TV channel numbers according to the following steps.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
5
Press the PLAY 8 or STOP 9 button to select VCR
PLUS+ CH., then press the FF :/OK button.
6
While a VCR Plus+ channel is flashing, press the PLAY 8
or STOP 9 button repeatedly or press the Number
buttons so that the arrow appears beside the VCR Plus+
channel number you need.
Press the FF :/OK button.
8
Press the EXIT/STATUS button.
2
Examine the lists
on page 36.
SET VCR PLUS+ CH.
VCR PLUS+ CABLE/TV
98
– – –
99
– – –
01
– – – –>
– – –
02
– – –
03
– – –
SELECT ,9 OR ENTER VCR+
CH. NO. THEN PUSH :/OK
TO END PUSH EXIT
7
While the space for the Cable/TV channel is flashing, press
the PLAY 8 or STOP 9 button repeatedly or press the
Number buttons to enter the Cable/TV channel number
from the list on page 36. Press the FF :/OK button.
Repeat steps 6-7 until you have entered all the channels on your
list.
4-7
6-7
3
8
3
VCR
TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH
VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE
INDEX
AUDIO/MUTE
MENU
-
+
CBL / DBS
1
2
3
4
5
6
7
8
9
START
STOP
DATE
DBS
DAILY
PLAY
REW
FF
/OK
STOP
WEEKLY
REV
/OTR
REC
REC
FWD
-
+
-
+
SPEED
0
CLEAR