Philips 4 HD S VHS HIFI VCR - Manual (Page 23)

STILL/SLOW Buttons
While recording, press STILL/SLOW
to temporarily stop the
recording. Press a second time to
resume normal recording. Details are
on page 31. During tape playback,
press STILL/SLOW once to
freeze the picture. Press repeatedly
to advance the Still picture frame by
frame. Details are on page 57.
During tape playback, press and hold
for more than three seconds to play
the tape in slow motion. Details are
on page 57.
TIMER Button
Press to access the timer recording
menu. Details are on pages 38-43.
INDEX Buttons
When tape playback is stopped,
press to search for index codes
recorded on the tape. Details are on
page 51.
AUDIO/MUTE Button
Press the TV button, then press the
AUDIO/MUTE button to eliminate
the TV’s sound. Press again to
restore the sound. Or, press the
VCR button, then press the
AUDIO/MUTE button to select
MONO or HIFI. Details are on page
54.
SMARTPICTURE Button
Press to select the SmartPicture
mode. Details are on page 56.
Shuttle Ring
Turn this ring in either direction for
forward or reverse searching of a
tape. The farther the ring is rotated,
the faster the search speed.
Releasing the ring stops the picture in
the Still mode. Details are on page 58.
VCR/TV Button
After pressing the VCR button, press
this button to select the signal that
your TV receives.
• VCR Position
Use to watch a tape, to watch a
program while recording it, or to watch
a TV broadcast using the CH(annel)
8/9 or Number buttons to change
channels at the VCR. The VCR light will
appear on the display panel when the
VCR is in VCR position.
• TV Position
Use to watch TV (selecting channels at
the TV) or to watch one program
while recording another. Details are on
page 35. The VCR light will not appear
when the VCR is in TV position.
After pressing the TV button, press
this button to select TV mode or
Auxiliary mode at the TV. (This may
not affect all TV brands.)
SPEED Button
Press to select the recording speed
(SP or SLP). Details are on pages 31, 39,
41, and 62.
EXIT/STATUS Button
Press to exit the on-screen menus.
Press to bring up the status display for
five seconds. Details are on page 27.
When tape playback is stopped, press
repeatedly to see the real-time
counter, the current channel, or the
current time on the display panel.
During tape playback, press repeatedly
to see the current time or the real-
time counter on the display panel.
For some PHILIPS and PHILIPS
MAGNAVOX TVs only:
Press the TV button, then press this
button to access the TV on-screen
displays or to exit the TV menu.
For other manufacturers’ TVs or Cable
Box/DBS:
After pressing the TV or CBL/DBS
button, the EXIT/STATUS button will
function as an ENTER button at the
TV or Cable Box/DBS.
JOG/SHTL (Shuttle) button
Press to activate the jog dial and
shuttle ring on the remote control.
The button will light for one minute.
You may operate the jog dial or
shuttle ring on the remote control
only when the JOG/SHTL button is lit.
Details are on page 58.
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
REV
/OTR REC REC
FWD
-
+
-
+
SPEED 0 CLEAR
• This remote control may or may
not operate your TV or Cable
Box/DBS. Or, it may only work
some features of this equipment.
See pages 28-29 for details.
Helpful Hint
Remote Control Buttons (cont’d) 23