Philips 4 HD S VHS HIFI VCR - Manual (Page 19)

Setting the Clock (cont’d) 19
5
Press the PLAY 8 or STOP 9 button repeatedly so that
AUTO flashes beside PBS CH.
• To display the time on the display
panel, press the EXIT/STATUS
button repeatedly.
• If you live near the boundary of an
adjacent time zone, your PBS
channel may come from a different
time zone. Use Time Zone Selection
to set your clock. Details are on
page 17.
Helpful Hints
6
Press the EXIT/STATUS button.
Automatic PBS Channel Selection
4
Press the FF :/OK button repeatedly to select PBS CH.
3
Press the PLAY 8 or STOP 9 button to select CLOCK,
then press the FF :/OK button. CABLE BOX USERS SET
CLOCK MANUALLY will appear briefly.
(If AUTO CLOCK is set to OFF, PBS CH. will not be available in
the menu. If this happens, press the FF :/OK button repeatedly
to select AUTO CLOCK, then press the PLAY 8 or STOP 9
button to set AUTO CLOCK to ON.)
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select INITIAL
SET UP, then press the FF :/OK button.
TIME – – : – – AM
DATE 01/01/99
AUTO CLOCK ON
PBS CH. AUTO
D.S.T. AUTO
TIME ZONE AUTO
TO SET PUSH ,9 THEN :/OK
TO END PUSH EXIT
7
An on-screen message will ask you to turn off the VCR.
Press the POWER button to turn off the VCR.
Auto will flash in the display panel until the clock is set. Leave the
VCR power off until the clock is set. If – – : – – appears on the
display panel after you turn off the VCR for several minutes, the
VCR could not find the time. Use a different method to set the
clock.
2-5
6
1
7
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
REV
/OTR REC REC
FWD
-
+
-
+
SPEED 0 CLEAR