Philips 4 HD S VHS HIFI VCR - Manual (Page 42)

42 Quick Programming (cont’d)
10
Press the POWER button to turn off the VCR. The r light
will appear on the display panel. (The r light and the Cassette-Inside
light will flash when you turn off the VCR if there is not a tape in the
VCR.) The VCR must be turned off for a timer recording to
take place. Leave the Cable Box/DBS on, if applicable.
9
Press the EXIT/STATUS button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
will appear on the screen. If PROGRAM NOT COMPLETED
appears, try again from step 1.
8
• If you want to record the program one time only, go to
step 9. You may also press the Number 8/DAILY or
Number 9/WEEKLY button repeatedly to select a ONE TIME
PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button so that DAILY PROGRAM
appears at the top of the screen. The VCR will record a
program every day from Monday through Friday, starting at the
same time and recording for the same length of time.
Do not select DAILY if the program occurs on a Saturday or
Sunday. The recording will not occur, even though the VCR may
accept the way you programmed the recording.
• If you want to record the program every week, press the
Number 9/WEEKLY button so that WEEKLY PROGRAM
appears at the top of the screen. The VCR will record a
program on the same day at the same time and for the same
length of time every week.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/–
08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 07/31/99
SATURDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
7
Press the Number 3/DATE+ or Number 6/DATE– button
to set the recording date. Every time you press a button, the
date changes in one-day increments. If you press and hold a button,
the date changes quickly. The day of the week will appear
automatically. (You cannot program the VCR to record more than
one year in advance.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/–
08:00 PM
STOP +/– 10:00 PM
REC SPEED SLP
DATE +/– 07/31/99
SATURDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
• If the end of the tape is reached
during a timer recording, recording will
stop. The VCR will eject the tape, then
turn itself off.
• If PROGRAM NOT COMPLETED/
CLASH appears at step 9, the timer
recording you just programmed
overlaps another timer recording. The
timer recording you just programmed
will not take place. The timer recording
menu will reappear. To cancel a timer
recording, see page 43.
• If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER
RECORDING flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the CLEAR button.
• PROTECTED CASSETTE CANNOT
RECORD may appear on the screen
as you turn off the VCR if a tape
without a record tab is in the VCR.
Helpful Hints
9
10
7
8
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
-
+
-
+
SPEED 0 CLEAR