Philips 4 HD S VHS HIFI VCR - Manual (Page 40)

ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– – – –
START +/–
– – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
40 Quick Programming
Follow the steps below to program your VCR to record TV
programs while you’re away from home. The VCR will turn itself on,
record, and turn itself off automatically. Before you begin make sure:
• Channels are programmed. Details are on pages 13-14.
• The clock is set. Details are on pages 15-19. If the clock is not set,
CLOCK MUST BE SET appears on the screen, followed by the
menu.
• There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position. The VCR light will appear on the
display panel when the VCR is in VCR position. If the VCR light
does not appear, press the VCR/TV button once.
• When you use a Cable Box/DBS, timer recordings are programmed
differently. Read pages 8-9 before proceeding.
Complete each step within 60 seconds of the previous step.
1
Press the VCR button, then press the TIMER button.
2
Press the PLAY 8 or STOP 9 button to select QUICK
PROGRAMMING, then press the FF :/OK button.
3
Press the CH(annel) 8/9 button to enter the channel you
want to record.
• If you are using a standard antenna or cable to VCR to TV
hookup, enter the channel of the TV program you want to record.
• If you are using a Cable Box/DBS and are not using the Controller,
enter the Cable Box/DBS output channel (03 or 04). Set the Cable
Box/DBS to the channel you want to record and leave the Cable
Box/DBS on for a timer recording.
If you are using the Controller, enter the channel number that you
want to record. The Controller will select the channel at the
Cable Box/DBS.
SELECT , 9 CHOOSE :/OK
A VCR PLUS+
QUICK PROGRAMMING
PROGRAM REVIEW
TO END PUSH EXIT
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– – – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
1
1
3
2
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
-
+
-
+
SPEED 0 CLEAR
• If you are using a DBS and are using
the Controller, the band indication
(CABLE/TV or DBS) appears to the
right of the channel number. If the
channel number that has been
entered requires that the band be set,
“SET CABLE/TV OR DBS=7” is disp-
layed on the bottom of the screen. To
record the program correctly, set the
proper band by pressing Number 7
button.
CABLE/TV:
To record a regular TV program
received on the VCR
OR
To record a cable TV program
received on the VCR or through a
Cable Box.
DBS:
To record a satellite program received
through a DBS.
Helpful Hints