Philips 4 HD S VHS HIFI VCR - Manual (Page 50)

ANT. IN
VIDEO
L
R
AUDIO
(MONO) RF OUT
CH3 CH4
CABLE
BOX
LP 30561-003
OUT IN
S-VIDEO
OUT IN
ANT. IN
VIDEO
L
R
AUDIO
(MONO) RF OUT
CH3 CH4
CABLE
BOX
LP 30561-003
OUT IN
S-VIDEO
OUT IN
6
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time. The \ light will appear
on the VCR 2 display panel.
• Unauthorized recording of copyrighted
television programs, video tapes, or
other materials may infringe on the
rights of copyright owners and violate
copyright laws.
• If a program has copy guard
protection, it may not record clearly.
• To stop copying tapes, press the
STOP/EJECT button on VCR 2, then
press the STOP/EJECT button on VCR
1.
• You may use the AUDIO and VIDEO
or S-VIDEO In jacks on the front of
VCR 2 instead if you prefer. If you do,
select A/V IN FRONT at step 4. If you
use the AUDIO IN and VIDEO IN or
S-VIDEO IN jacks on the back of
VCR2, select A/V IN REAR at step 4.
Then, select FRONT A/V INPUT or
REAR A/V INPUT in the VCR SET UP
menu.
Helpful Hints
The instructions on this page show you how to copy tapes. The illustration uses two VRA999 VCRs.
Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow
steps 1-6.
1
VCR 1 will play your tape. Insert a prerecorded tape in VCR
1. If the tape does not have a record tab, playback begins. If this
happens, press the STOP/EJECT button on VCR 1 once.
2
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the VCR power is on and the VCR is in VCR
position. (The VCR light will appear on the display panel. If it
does not, press the VCR/TV button once.)
3
Turn on the TV; set it to channel 3 or 4, whichever channel
the CH3/CH4 switch on VCR 2 is set to.
4
Point the remote control at VCR 2. Press the VCR
button, then press the Number button 0. Press the
CH(annel) 8/9 button so that A/V IN FRONT or A/V IN REAR
appears on the screen. (See Helpful Hints at right for details.)
5
Point the remote control at VCR 2. Press the SPEED
button to select SP or SLP.
1) Use audio
cables to connect
the AUDIO OUT
Jacks on VCR 1
to the AUDIO IN
Jacks on VCR 2.
VCR 1
Playing VCR
VCR 2
Recording VCR
2) Use a video cable to connect the
VIDEO OUT Jack on VCR 1 to the
VIDEO IN Jack on VCR 2. (Or, to
improve picture quality, you may connect
an S-Video cable to the S-VIDEO OUT
jack on VCR 1 and to the S-VIDEO IN
jack on VCR 2 instead.)
3) Use an RF coaxial cable to connect the RF OUT
Jack on VCR 2 to the TV’s ANTENNA IN Jack.
audio cables
video cable
50 Rerecording (Tape Duplication)