Philips 4 HD S VHS HIFI VCR - Manual (Page 59)

59 Child Lock
The Child Lock feature disables the buttons on the VCR and
the VCR feature buttons on the remote control.
• If you lose your remote control
when Child Lock is on, contact
Philips.
Helpful Hint
VCR TV
VCR/TV
QUICK PROGRAMMING
POWER
STILL/SLOW
EJECT
CH VOL
EXIT/STATUS
TIMER
JOG/SHTL
SMARTPICTURE INDEX AUDIO/MUTE
MENU
- +
CBL / DBS
1 2 3
4 5 6
7 8 9
START STOP DATE
DBS DAILY
PLAY
REW FF
/OK
STOP
WEEKLY
REV
/OTR REC REC
FWD
-
+
-
+
SPEED 0 CLEAR
2
To cancel Child Lock, press the VCR button, then press
and hold the POWER button on the remote control for
more than seven seconds until the VCR power comes on.
The dash (-) will disappear from the display panel.
1
When the VCR is on, press the VCR button, then press
and hold the POWER button on the remote control for
more than seven seconds until a dash (-) appears to the
right of the clock on the display panel. The power will turn
off.
• The dash (-) will appear on the display panel.
• The remote control will still operate your TV or Cable Box/DBS if you
have set it to do so. Details are on pages 28-29.
• The VCR power may come on briefly if you insert a tape. However,
the power will shut off again in about five seconds.
• Timer recordings will take place as scheduled. Make sure a tape is in
the VCR. Make sure the VCR power is off before the recording’s
scheduled start time. The dash (-) will reappear on the display panel
when the timer recording is finished.
• If you press the POWER button on the VCR to stop a timer recording
that is in progress, recording will stop and Child Lock will be
reactivated immediately. Pressing the POWER button on the remote
control will not affect the timer recording.
When Child Lock is activated...
1-2