2GIG Z-Wave - Manual (Page 14)

12
Scenes & Rules
Running Scenes
Scenes can be run by hand manually, or be
automatically run when triggered by a Rule.
To run a Scene manually, use the following
steps:
1. From the Home Screen press the HOME
SERVICES button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
4. Press the RUN button next to the desired Scene.
5. A Scene execution confi rmation screen will be
displayed, press OK.
Deleting Scenes
Scenes can be deleted individually.
✓ NOTE: Deleting a Scene will also delete any
Rule associated with the Scene.
To delete a Scene, use the following steps.
1. From the Home Screen press the HOME
SERVICES button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
Press the name of the Scene to delete.
4. Press DELETE. A confi rmation screen will be
displayed, press DELETE SCENE to confi rm, or
CANCEL to quit without deleting.
5. A Scene Deleted confi rmation screen will be
displayed, press OK.
Scene Executed Screen
Scene Deleted Screen
Scene Action Screen
Delete
scene
button
RUN Button on Scenes Screen
Press ADD SCENE
button
Scene Delete Confi rmation Screen
Press to confi rm