Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 14)

11
1
2
3
4
5
6
7
8
9
10
section
Local Installation
Pre-Configuration
(Typical Switch configuration)
Where to place the Switch:
The enclosure of the Switch is designed for stand-alone or rack-mount
configuration. The Switch can be mounted to a standard 19-inch server rack
using the included rack-mount brackets and screws.
Consider the following when deciding where to place the Switch:
• whether or not you intend to use the front-panel port selectors
• the lengths of the cables attached to your keyboard, monitor, and mouse
• the location of your servers in relation to your console
• the lengths of the cables you use to connect your servers to the Switch
AdXVa8dchdaZ
Dbc^K^ZlHB7
@KB"dkZg">EHl^iX]
EH$'!JH7!VcY
HjchZgkZgh
86I*8VWaZh
HZgkZg
>ciZg[VXZ
BdYjaZh
A6C$L
6C