Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 21)

18
Local Installation
Step 3 Connecting Servers to the Switch
(USB Connection)
3.1 Make sure your server is powered on.
3.2 Using the Belkin OmniView SMB Server Interface Module for USB
(F1DP101A-AU), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
3.3 Connect the USB connector to an available USB port on the server.
(Refer to diagram below.)
Server
Server Interface Module