Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 46)

43
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Remote Console
Starting a Remote Session
To start a remote session:
1. At a client computer, open Internet Explorer or Firefox web browser and
type the IP Device’s IP address (
https:// IP address).
2. When the Login screen appears, type in your user name and password,
and click
. By default, the user name is “admin” and the password is
“SMBremote” (both are case-sensitive).
3. If it is your first time connecting, you will be prompted to install the Belkin
certificate and the Microsoft ActiveX control. You must have administrator
privileges on your client computer to install the ActiveX control.
4. The screen of the currently selected server on the Switch will appear. The
quick-access toolbar will also appear on the right side of the screen.
5. If the target server is currently being accessed by another user, a dialog
box will appear, giving you the option to “Take Over”, “View Only”, or
“Cancel” (see Fig. 10). Select one of these options. An administrator has
the option to take control over any server. A user only has this option when
the current session is run by another user, but not by an administrator. The
dialog box will not appear for a “
view only” user.
Fig. 10 Server-Access Dialog Box