Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 58)

55
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Remote Console
Selecting a Server
The quick-access toolbar allows you to easily select and switch to any server
connected to the Switch or daisy-chain configuration.
To connect to a different server:
1. Move the cursor to the area above the video screen; the toolbar will
show up.
2. In the quick-access toolbar, click . A list of connected servers will
appear (see Fig. 20). If a serial device is connected to the IP Device, it will
also appear on the list.
3. Select the desired server or serial device. The screen of the server or the
serial-device window will appear.
Note: If security is enabled on the KVM switch, remote switching will not be
allowed through the drop-down bar.
Fig. 20 Server-Selection Menu