Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 19)

16
Local Installation
Step 3 Connecting Servers to the Switch
(PS/2 Connection)
3.1 Make sure your server is powered off.
3.2 Using the Belkin OmniView SMB Server Interface Module for PS/2
(F1DP101A-AP), connect the VGA connector to the monitor port on your
server. (Refer to diagram below.)
3.3 Connect the PS/2 mouse and keyboard connectors to the mouse and
keyboard ports on the server. (Refer to diagram below.)
Server
Server Interface Module