Belkin Omniview SMB KVM-over-IP Switch F1DP108G - Manual (Page 24)

21
1
2
3
4
5
6
7
8
9
10
section
Local Installation
3.4 Connect the Switch to the Server Interface Module using the
included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to
diagram below.)
;X`jp:_X`e :fejfc\
=C8J? C8E J<I@8C
>fCfZXc
3.5 Power up your server.
3.6 Repeat steps 3.1 through 3.5 for each additional Sun server you
wish to connect.
Note: When a USB or Sun Server Interface Module is connected to a Sun
server, the Server Interface Module emulates the Sun keys using a set of
key combinations called combo keys. Refer to the table on page 67 for a
list of Sun functions supported by the Switch.